[Resolved] TX134 Remotes failing.

This topic contains 3 replies, has 2 voices, and was last updated by   William 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #13152 Reply

    Will Imanse

    I have had a number of the TX134 remotes fail. The led flashes on and of rapidly when the button is pushed. On the working remotes it stays on as long as the button is held down.
    I have tried new batteries as well as swapping batteries with the good units.
    Anyone have any ideas?

    #13158 Reply

    William
    Keymaster

    I’m not sure if it is the working mode accidentally changed to trioaes mode (which shows flashes instead of solid led)

    Would you please follow the steps below to change working mode?

    https://imgur.com/hbJbMjt

    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

    #13263 Reply

    jason holtz

    I’ve had three TX134 remotes fail since January. I’ve tried changing modes and it doesn’t correct the problem.

    #13264 Reply

    William
    Keymaster

    Before change working modes, please change a fresh battery.

    And confirm the working mode is correct after mode change.

    Then program to receiver again if required.

    Let me know if you still have the problem, thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: TX134 Remotes failing.

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: