[Resolved] Programming help 202U KIT-1

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) Programming help 202U KIT-1

This topic contains 1 reply, has 2 voices, and was last updated by   William 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13764 Reply

    Kevin

    I purchased a KIT-1 202U.

    I would like to program the device so that:

    Button A to activate relay 1.
    Button B to activate relay 1 & 2 concurrently.
    Button C to turn off both relays regardless of current position.

    I don’t want the relays to toggle with multiple button presses. The first press activates the relay, multiple presses would have no action. Is this possible with the receiver that I purchased?

    #13768 Reply

    William
    Keymaster

    Sorry it is not possible for 202U receiver.

    But there is a workaround to use 2pcs 202U receiver, and program like below.

    Program button A to 202U (#1) RELAY (#1).
    Program button B to 202U (#1) RELAY (#1) AND 202U (#2) RELAY (#1).
    Program button C to 202U (#1) RELAY (#1#2) AND 202U (#2) RELAY (#1#2).

    And put all 202u in true latching mode.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Programming help 202U KIT-1

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: