[Resolved] Operate 1 relay in 2 different modes with 2 buttons

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) Operate 1 relay in 2 different modes with 2 buttons

This topic contains 2 replies, has 3 voices, and was last updated by   Bryson79 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12817 Reply

    Rob L

    Is it possible to program button A to activate relay 1 in Pulse mode and program button B to activate relay 1 in hold mode and do the same thing with buttons C and D using relay 2?

    Thanks
    Rob

    #12821 Reply

    William
    Keymaster

    Sorry but it is not possible on our receiver.
    On our receiver, DIP switches controls the mode, while button just assigns to different relay.
    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

    #12866 Reply

    Bryson79
    Participant

    A little late but you can program the receiver so one relay is momentary and the other is latching. Then hook both relays in parallel and you can achiever the function you are looking for, it will consume both channels of your receiver.

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Operate 1 relay in 2 different modes with 2 buttons

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: