[Resolved] KIT-1 works with one Garage Door Opener but not with second

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) KIT-1 works with one Garage Door Opener but not with second

This topic contains 1 reply, has 2 voices, and was last updated by   William 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13990 Reply

    Max Rivers

    It works with our old Genie but not with the newer Chamberlain wired exactly the same to relay 2. Receiver lights up led’s labeled “2” and clicks but garage door doesn’t open. I’m using old phone wire. Is it possible that the wire is too thin for the newer opener?

    #13993 Reply

    William
    Keymaster

    I’m afraid the problem is because newer Chamberlain doors (such as those with yellow learn buttons) uses a coded signal for open/close.

    So the old school simple 2-wire connection doesn’t work anymore.

    Please see below for more details if you’re interested,
    https://community.garadget.com/t/security-2-0-openers-yellow-learn-button/156/12

    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: KIT-1 works with one Garage Door Opener but not with second

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: