[Resolved] KIT-1 interlock system and timed output

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) KIT-1 interlock system and timed output

This topic contains 4 replies, has 2 voices, and was last updated by  Raymond Chang 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #13368 Reply

    Andrew Smith

    Is there a way to program the KIT-1 device to allow a timed output as well as having the relays interlocked. I need to have two circuits that do not get powered at the same time, but also have a timed shut off.
    Thank you for any help.

    #13375 Reply

    William
    Keymaster

    Sorry it is not possible, because interlock use both relays, and there is no spare relay for timed output.

    In our next version, it is possible to have one relay in timed mode, the other in latching mode (or momentary).

    But still, interlock is not possible with timed.

    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

    #13999 Reply

    Raymond Chang

    I bought the kit-1 on Amazon and have been trying to get it working. The problem is there seems to be no power output (to close the relay) ? The power light is on, connecting to a 12V battery. And the output is to a power inverter with 0.5amp load. The inverter works when directly powered from the battery, but when I connect the inverter to the Relay COM and NO and hit the remote button, nothing happens ? I used a voltmeter to test if there
    is any power across the COM and NO terminals and it reads 0 ? Very frustrated, I hope I dont have to return this and you can help me get this working. Thanks !

    #14001 Reply

    William
    Keymaster

    Hello,
    As stated, our receiver are voltage free dry contacts, they don’t output power.
    For a simple led application, see below.
    https://imgur.com/a/oMZQYDX
    You will need to jump wires.
    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

    #14010 Reply

    Raymond Chang

    Thank you for clarification, it worked !

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: KIT-1 interlock system and timed output

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: