[Resolved] How To Program Letter Buttons on TX134

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) How To Program Letter Buttons on TX134

This topic contains 1 reply, has 2 voices, and was last updated by   William 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13526 Reply

    David C.

    I am installing two storage lockers in two different vehicles and received two 202U V5e receivers with the dipswitches set at 1&2 off, 3 on; and two TX134 transmitters with letters A, B, C, and D on the keypad. My question is, how can I set each transmitter to activate the receiver (and thus unlock the storage locker it’s wired to) with a unique combination of key presses on each? i.e.; how can I set Receiver No. 1 to operate with key combination A-C-C-D, and Receiver No. 2 to operate with key combination A-B-D-C?

    #13527 Reply

    William
    Keymaster

    I’m afraid you can’t do it that way.
    Our remote control just supports single button or button combination (e.g. A+B etc).
    It does not support button sequence (like keypad).
    Thanks.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: How To Program Letter Buttons on TX134
Your information: