[Resolved] 202U, am I doing something wrong?

Home Forums Wireless Kits Support (KIT-1, KIT-2, TX134 etc) 202U, am I doing something wrong?

This topic contains 1 reply, has 2 voices, and was last updated by   William 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #14059 Reply

    Lief

    I’m trying to set up a remote switch for a siren, the siren works, when I wire it directly. The 202U responds has been programmed and set to hold, its power lights come on when connecting it to power. The relay lights switch on when hitting the programmed button on the remote. However, no power is being transmitted to the siren. I can’t see anything that I’m doing wrong, and I think this unit might be faulty?

    I’m willing to return it and get another one from you guys, seems like a good design, either I’m doing something wrong, or this unit has an issue. I have a picture of how I have it wired, but I’m not sure how to link it here.

    Thank you for your time.

    #14067 Reply

    William
    Keymaster

    Hello,
    As stated, our receiver are voltage free dry contacts, they don’t output power.
    For a simple led application, see below.
    https://imgur.com/a/oMZQYDX
    You will need to jump wires.
    Thanks.

    Buy KIT-1 at Amazon.com here
    Want better range and security? check out KIT-2
    Need spare remotes for KIT-1 or KIT-2? see here

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: 202U, am I doing something wrong?

You can use BBCodes to format your content.
Your account can't use Advanced BBCodes, they will be stripped before saving.

Your information: