The Chameleon RX-F FIXED CODE TWO CHANNEL RECEIVER really is an outstanding innovation. 

The Chameleon RX-F works with the TXF 433 as well as most other 433MHz fixed code formats on the market today.

This includes CAME, BFT, BENINCA, ALLMATIC, ERREKA, FADINI, NICE, FAAC 433MHz, ROGER, PROTECO.

You can programme in one or all of these brands AT THE SAME TIME.

PROGRAMMING A TRANSMITTER INTO OUTPUT 1

1. Press the SW1 button on the receiver ONCE, the LED on the unit will light up.
2. Now press the button on your transmitter you wish to programme and keep it held until the LED turns off.
3. Once the LED has turned off, press the button on your transmitter again until you get 4 confirmation flashes on the receiver.
4. Now your transmitter is programmed into the receiver.

PROGRAMMING A TRANSMITTER INTO OUTPUT 2

1. Press the SW1 button on the receiver TWICE, the LED on the unit will light up.
2. Repeat stages 2, 3 and 4 from the output 1 section.

RESETING THE RECEIVER MEMORY

1. Press and HOLD the SW1 button on the receiver.
2. Turn the power off to the receiver.
3. Re-power the receiver.
4. Once the LED has turned off, release the SW1 button.
5. The receiver memory has now been cleared.

MOVING THE JUMPER FOR CORRECT VOLTAGE

1. For 24v feed, place the jumper across position 1 – 2.
2. For 12v feed, place the jumper across position 2 – 3.